We wish all business partners and interested parties a merry and peaceful Christmas and a good start to the new year 2020!

Our company is closed from 23.12.2019-3.1.2020. You can reach us again in old / new freshness from 6.1.2020.

Loading heavy material and transporting construction machines with the same low bed trailer – that’s what you can do with the Blomenröhr 11,9t low bed trailer with inserted aluminum loading ramps with a Palfinger loading crane!

Heavy drill pipe should be un-/loaded at the construction site by means of a loading crane from a low loader. The requirement of the customer was that the crane should charge loads of 1200kg with a reach of 2.70m onto the trailer. When mounting on central axle trailers, you need to pay attention to the load distribution of the vertical load / axle load – so the weight of the components need to be taken in account as well as the position of the load and the axles.
The trailer manufacturer Blomenröhr chose for this project the Palfinger PC3800 crane, which weighs only 238kg and has a payload of 1360kg at a range of 2.70m. For the drive of the crane a motor was selected, which drives the hydraulic aggregate with 12l tank contents. The crane is supplied with 24V control power via the towing vehicle and can be operated by a remote control. Before operation, the side supports must be pulled out and extended hydraulically.
Further requirement: Both machines and cargo as well as long material should be able to be transported with the trailer. The Blomenröhr model 695/11900 with 1000kg support load was chosen. In this type of vehicle, the aluminum loading rails with a load of 9 tons are inserted underneath the loading platform and secured by a steel flap with lock. The ramps are hooked into the shaft at the rear and the tailgate is closed by a hinged door. The free loading area is 4,50m – the chassis is extended forward by 1m for the crane body. Due to the crane structure with motor, tank and hydraulic unit, the load capacity of 1000kg is claimed at about 40%.

Thanks to the equipment of the low loader with the loading crane, the trailer can be used universally and kills two birds with one stone: a driver can load and unload heavy material at the construction site and transport it in one go. At the same time, the low loader is ideal for transporting construction machinery.

Minitrailers with overrun brake now also available with self adjusting brake!

Depending on the load condition and the frequency of use, the brake shoes on overrun brake trailers wear down at different speeds. To counteract the declining braking effect, the trailer brake needs to be adjusted in the workshop. There are no prescribed maintenance intervals, but the user himself must check the braking effect! The police control the braking effect by a simple test – the awarding of penalties  are the order of the day in Germany with decreasing braking effect, especially in the field of commercial use by gardeners and landscapers or construction companies. These penalties and frequent visits to the workshop can be counteracted by installing a self-adjusting brake.

You can order the self-adjusting brake either as original equipment for new vehicles:
Z02-090 Minitrailer axles equipped with self-adjusting brake – for an optimized and consistent braking effect without adjustment; This eliminates the maintenance intervals on the brake and the ride comfort increases (no more jerky, uneven braking). When reversing, the adjusting device is deactivated
Or you order the retrofit kit in our spare parts sales – for this we need the chassis number of the Minitrailers that need to be equipped.

Level control for low bed trailers with uneven load distribution

 

19t three-way tipper with a loading area of ​​5,50m

At the Bauma shown and so many times met with international interest: our twin-wheeled 18t / 19t three-way tipper with 5.50m loading area length, 14.8t payload and 8cbm loading volume! In the attached pdf you will find the vehicle information with equipment information of the shown special model:

 Vehicle information Bauma 2019 model 889-18000

 

 

Redesign of our double box – can also be delivered hot-dip galvanized!

 

 

Die Leitmesse Bauma hat sich in diesem Jahr selber wieder übertroffen: über 620.000 Besucher in guter Stimmung aus über 200 Ländern, 3700 Aussteller auf 614.000qm – die Tage auf der Bauma in München (8.4.2019 bis 14.4.2019) waren auch für uns eine ganz große Herausforderung!
Blomenröhr Fahrzeugbau hat so viele und so große Fahrzeuge wie nie ausgestellt: einen 21t Tieflader, zwei 19t Kipper, einen 14t Kipper, ein 11,9t Tandem-Tieflader, ein 7,5t Tandem-Durchfahrtieflader und zwei Minitieflader mit vielen neuen Detail-Ausstattungen wurden von sehr vielen Besuchern aus aller Welt angeschaut und angefragt.

  

  

Mittlerweile können wir sagen, dass die Angebotserstellung für die Interessenten so gut wie abgeschlossen ist – wir haben mehrere Hundert kundenspezifische Angebote erstellt und versendet.
Unser Messeteam dankt allen Stammkunden, die seit Jahrzehnten zufrieden unsere Tieflader und Kipper im Einsatz haben, allen neuen Interessenten und unseren Händlern für ihren Besuch und die vielen guten Gespräche, die wir führen konnten sowie die tollen Feedbacks, die wir erhalten haben!

 

    

Unser Messeteam:
Michael Raderkopp, Cordula Wenzel, Frank Hüttmann, Christian Quiring, Joachim Wenzel, Thomas Batzel

We would be very happy to meet you at the Bauma 2019 in Munich on our outside stand FN.826/2 – next to the Palfinger booth.

As the construction machines are getting bigger and heavier we are presenting new, optimized low bed trailers and dumpers at the bauma 2019 in Munich, which practically implement this topic and have more loading volume and mass than before. The following vehicles are issued by us:

– Type 687/21000 – 21t Tandem Low Bed trailer with 16,7t payload and a loading height of only 87cm!
– Type 899/18000 – 19t Two-way tipper with 6m loading area length, with Info center for reading the axle / support load and other useful information
– Type 889/18000 as a new SPECIAL MODEL – 19t Three-way tipper, twin tires, with 5.50m load bed length, with 60cm high side walls with reinforcement, spring actuators and inserted ramps – the combination tipper especially for the transport of large quantities of bulk material, but also for the transport of construction machinery
– Type 888/14000 – 14t Three-way tipper with large single tires 385/55 R 19,5 and elevated front wall
– Type 664/11900 – 11.9t Tandem-Low Bed trailer with new side profile with drop eyes approx. every 60cm
– Type 553/7500 hot dip galvanized – 7,5t low loader now with Wabco ABS brake and full LED lighting (soon also with COC)
– Type 441/3500 painted – 3.5t Tandem-Minitrailer with height adjustable drawbar
– Type 428/2750 hot-dip galvanized

The focus will be on the topic “load securing” – we now have a wide range of different external profiles with lashing eyes and retractable straps and lashing hooks as such, from which you can choose the optimal load securing concept for yourself.

 

Visit us at the next Bauma in Munich from April 8th to 14th 2019!
You will find us outside at Stand 826/2 next to the “Palfinger” stand. We will show trailers of all categories from our product program:
Minitrailers as well as 21t Low Bed trailers or 18t Three side tippers.
You are welcome for further information and check our quality! We will be grateful to send you offers of trailers suitable for the machines you want to transport.

In this year you can convince yourself from the quality of our products at the following fairs and exhibitions:

26.5.2018 Day of the open doors at Michels Baumaschinen in Geldern

30.8.-1.9.2018 Client event by Beutlhauser Frank at the quarry Mendiger Basalt close to Weißenthurm

12.-15.9.2018 GaLaBau 2018 at the fairground in Nuremburg in hall 7 – same exhibition stand as in the last years

We own in our plant in Geseke two big industry varnishing cabins. We prime and varnish with the electrostatic spraying method also for machine-builders steel construcions on a high quality level and material saving in the required colour.

Just ask us: Tel 02942 5799770! We create offers upon varnishing volume.

 

 

Das Team von Blomenröhr Fahrzeugbau und Birco Bremstechnik wünscht allen Geschäftspartnern und Interessenten frohe und besinnliche Festtage sowie einen guten Start ins Neue Jahr 2017!

Ab 2.1.2017 sind wir zu den gewohnten Geschäftszeiten erreichbar.